Basic trellis form for framing windows or as a design element for windowless wall surfaces, gables, etc.. With more material, 4 or 5 parallel ropes are also possible. Please refer to the guidelines in the section on climbing plants for support in choosing a suitable construction style (see charts at the bottom of each plant profile).
Order as a kit: parts list, information, and assembly tips
|63-110 €||139.80 €||175-312 €||319.80 €||449.80 €|
Height x Width: max. 3.2 m x 3.2 m (4 m x 4 m for heavy/massive kits ). Distance between ropes: approx. 20 -35 (40) cm. For larger dimensions -- measured form the outside -- additional short "rope bridges" consisting of two mounts and a cross clamp must be provided every 1.5 m (2 m) or so. The base of the climbing aid is approx. 0.5 - 2 m above the ground.
Installation: carried out as shown in the diagrams, please also refer to the installation tips (see chart above). 3 clamping rings or similar are still required as a mounting aid. For the assembly of easy kits no diagrams are available yet. However, if you order material for it and ask specifically for this, you will receive installation instructions in advance.
Vine Training/Shoot Guidance: See diagrams R 01, R 03. Combinations of cordon and horizontal cordon. Leadership of the individual shoots according to the following principle: in the horizontal areas always on the lowest rope; in the vertical areas- always in the middle. Preferably cut short; above-- cut medium-long or long.