Wire Rope Trellis System 5040

Order as a kit: list of parts, information, and assembly tips

The pre-assembled kits are suitable for all wall types with the exception of walls with external insulation, cladding, and thin-walled concrete elements. Alternatives can be put together in all cases.

Height x Width: with preassembled kits-- up to approx. 2.2 m x 2.2 m (with heavy/massive kit- up to 4.0 m x 4.0 m). Base of climbing net approx. 0.5 - 1.2 m above the ground. Depending on the needs of the climbing plants plants, the meshes can be small (up to approx. 30 cm), medium-sized (up to approx. 50 cm), or - with extension (see below) also large (up to approx. 180 cm). For narrower mesh stitches, basic form 5050 is less expensive.

Expansion: With the same number of wall mounts but more wire rope, climbing nets up to 6.0 m x 6.0 m (up to 8.8 m x 7.2 m with heavy kits) and also rectangular arrangements as in the case of 8010 (see photo) are also possible. If necessary, free-floating cross points should then be replaced by wall mounts (for stability). With more cable *and* more mounts, the basic form is expandable as desired/required (see also the related system 8030. Please take into consideration the special features of high greening and also lightning protection.

Installation: as shown in the diagrams; please also refer to the installation tips above click on a chart for details).

Vine Education/Shoot Guidance: See diagrams. For small and medium mesh sizes, a small trellis form with a double flat arch (R 01), fan shapes (R 02); also as a cordon as a double-armed palmette (R 03) or with several vines as single trunks/stems (without picture).