Wire Rope Trellis System 5060

Basic trellis form for framing windows or as a design element for windowless wall surfaces, gables, etc.. With more material, 4 or 5 parallel ropes are also possible. Please refer to the guidelines under climbing plants for support in choosing a suitable construction style (see charts at the bottom of each plant profile). 

Want to orderas a kit? Click on green links here in chart for all the info!

63-130 €159.80 €198-335 €339.80 €494.80 €
 Info Info Info Info Info
 Mounting Mounting Mounting Mounting Mounting


Our pre-assembled kits are suitable for all wall types, with the exception of insulation, cladding, and thin-walled concrete elements. Alternatives can be put together in all cases.


Height x Width: max. 3.2 m x 3.2 m (4 m x 4 m for Heavy / Massive Kits ). Distance between ropes: ~20 -35 (40) cm. For larger dimensions -- measured form the outside -- additional short "rope rungs" consisting of two mounts and a cross clamp must be provided every 1.5 m (2 m) or so. Trellis base: ~0.5 - 2 m above the ground.


Installation: carried out as shown in the diagrams, please also refer to the mounting tips (see chart above). 3 clamping rings or similar are still required as a mounting aid. For the assembly of easy kits no diagrams are available yet. However, if you order material for it and ask specifically for this, you will receive installation instructions in advance.


Vine Training: See diagrams R 01, R 03. Combinations of cordon and horizontal cordon. Leadership of the individual shoots according to the following principle: in the horizontal areas always on the lowest rope; in the vertical areas- always in the middle. Preferably cut short; above-- cut medium-long or long.

Vine training on system 5060

Medium Kit "Classic"

Light / Medium ("Eco" and "Premium") / Heavy / Massive Kit