• Deutsch
  • English
  • Français

Wire Rope Clamps/Grips, etc..

Here you will find information about fastening elements for wire ropes. This includes: rope clamps/grips, thimble eyes (thimbles), clamps, rings, and other accessories. FassadenGrün helps you to plan your mounting systems with healthy minimalism. For this reason we do not use tensioners (turnbuckles) in our trellis kits, but prefer a tensioning by hand. Here you can find out when the use of certain parts and accessories makes sense. Information on the individual items can then be found on the respective product sheets.

>>> Price list

Clamps and Thimble Eyes

Rope clamps are robust but are very simple components; they are not usually used in fine architectural cables. We use them with our 'easy' construction design (easy kit). For 2 mm cables, we use simplex terminals, which are simple and inexpensive. For 3 and 4 mm rope, we recommend the use of classic wire rope grips/clamps, which generate high clamping forces (very secure) with minimal installation effort and cost. In our pre-assembled kits, they are already included. The decorative ovoid (egg shaped) clamps are particularly interesting for use in or near playgrounds-- the smooth, rounded form minimises risk of injury. They require, however, an additional rope tensioning device or turnbuckle because the two rope strands cannot be tightened against each other. The additional use of thimbles with 3 and 4 mm rope is functional and aesthetically pleasing, but not essential. Before mounting in eyebolts or similar, the small thimble eyes must be opened; or, you can order open thimble eyes from FassadenGrün.

Ferrules (metal press sleeves)

From remainders or upon request (at larger quantities), you can also receive, as an alternative to cable clamps, inexpensive ferrules (similar to Nicopress) for 3 and 4 mm. This method of fastening, however, requires special pliers and they metal sleeves are then not detachable.

Turnbuckles and Tensioners

At FassadenGrün, we prefer to avoid the use of tensioners and turnbuckles, and favour tightening cables by hand. In exceptional cases, as with cable systems like 0040 and 0010 (sometimes also 0050), or generally when very long cables are spanned, a turnbuckle is useful. Tensioners are screwed far apart before assembly, then fastened with the assistance of two cable clamps, then screwed on to tighten the cable segment. 

 

We offer two types of tensioners, both of which can be used with 3 mm and 4 mm ropes: 1. rope tensioners or 'turnbuckles' with open sleeves and 2. 'shroud tensioners' with closed sleeves. The individual sizes fit different rope diameters. The first group (including SP 05160) is less expensive and made of stainless steel V2A; the second group (including turnbuckle SP 06190) is more attractive, and the tightened state can be permanently fixed with a lock nut; loosening of the rope tension through movements by wind, etc., is then not possible. SP 08280 is suitable for particularly heavy or massive applications. The GS wire tensioner SP 03000 is a special case, used rather for re-tensioning already mounted cables up to 3 mm in diameter.

Relief Springs

Load-relieving springs SF 02530 are recommended only in exceptional cases, e.g. when it is already clear that an anchoring (plugging/dowelling) will not provide the required holding values with regard to transverse forces (approx. 250 kg with 3 mm rope). This can be the case with very loose, soft masonry as well as with clay building-materials. Additional cable clamps (grips) will be required for the mounting.

Clamp Rings

Clamping rings KL 00034 are used primarily for free-standing climbing systems, e.g. with cable system 0050.

Rings and Quick Links

Special parts like the stainless steel ring RI 05050 and quick (screw) link SG 05050 are required if several cables end at the same point, for example, when several ropes come from a ground anchor.

Formation of a rope loop with 1) rope clamp and 2) ferrules
Metal ferrules and clamps
2 wire rope loops with clamps and thimble eyes
Stainless steel wire rope clamps