• Deutsch
  • English
  • Français

Wire rope system no. 6030

Wire rope system no. 6030

Basic form with 3 wire cables, also for slightly greater heights. Used as a formal element on larger, unstructured wall areas, both for individual and group positioning. Please refer to the guidelines in the section on climbing plants when choosing a suitable construction style.

Order as a kit: Parts list, information and assembly tips

16-27 €39,80 €58-95 €99,80 €124,80 €

The pre-assembled kits are suitable for all wall types, but not for insulation, cladding, and thin-walled concrete elements. Alternatives can be put together in all cases.


Height x breadth: max. approx. 2.2 m x 1.2 m at a heavy/massive kit to 3.5 x 1.9 m. The middle crossways cable has to be ordered above the middle a little according to the "golden cut". Base approx. 0.3 - 0.8 m over the ground.


Installation: carried out as shown on the graphs, please also refer to the installation tips (s. above). For "golden cut" see above.


Shoot guidance: See graphics. For a little cord tree (R 01). The trunk must remain low enough for annual new growth around which to grow upwards. By strong growth or with knotty kinds (R 02) trunk must also be low enough for annual new growth to grow upwards. Bifurcation in two cordon arms ('palmette'), then the growth should show each inwards towards the middle rope, pinning or plugging the green shoots take place on this cable (R 03). Trunks in each case to approx. 50 cm under upper edge climbing field lead.

Support system 6030 as a Medium Kit "Classic," for clematis
Climbing plant support for clematis
Medium Kit, clematis
Garage with espalier/trellis
Massive Kit
Trellis/lattice made of steel cable
Vine in fan form
Trellis with vines

Grapevine training on system 6030

R 01
R 02
R 03
Easy Kit, pinning and interweaving aid for ivy
Fan trellis for English Ivy
Easy kit
Medium kit "Classic"
Light / Medium ("Eco" u. "Premium") / Heavy / Massive kits