Cable-Rod Connector 3-5mm, SK 34515

Product Sheet

Description / Price

Cable cross clamp for connecting cables and metal rods, made of stainless steel A2. Diameter 15 mm, length 19 mm, two different side-drilled holes (4.3 and 5.1 mm). Compact, decorative style. Excellent holding force (grip)-- no slipping or sliding of cable. >>> Price



For attaching cables (3-5 mm diameter) with each other or with trellis rods at intersection points in a trellis grid. Can also be used for metal rods with 5mm diameter. Adjustable and detachable. You can use this cross clamp as a self-supporting cross point making larger trellis grids possible. Please refer as needed to our general information on the use of cross clamps.

For fixing intersecting wire ropes 3-5 mm and/or climbing poles in a crossing point. Can also be used as a pure bar connector, but then only for one bar 5 mm (drill hole diameter see above). Finely adjustable and detachable again. Cantilevered cross points can also be formed with this rope cross clamp, creating flat climbing nets. Please refer to the general information on the use of cross clamps.



Loosen grub screws a little so that you are able to slide the clamps onto the cable, before fastening the cable to the wall mounts. Next, insert the intersecting rods or cables into the perpendicular holes. Adjust and tighten the grub screws where necessary, holding the cable clamp with pliers if needed. 


Special Features

This cable cross clamp up to 5mm is particularly economical. As this particular clamp has drilled holes rather than open grooves/teeth, mounting can be a little more complicated.



Made in Germany (Saxony); grub screws from the Far East.