XXL Support M12 f. Insulation/ETICS, WM 12XX9

Fassadenanker Dämmung für Seil

Product sheet

Description / Price

XXL holder or 'Cross holder' for walls with particularly thick outer insulation made of A2 stainless steel, threaded shaft M 12, cross head d= 20 mm cover plate polished with grub screw, nut, spring washer, and seal made of weatherproof foam shims (plastic) distance body (hardwood: Robinia wood, impregnated, of course, mildew  and insect-resistant). Included in the extent of supply: 2 -5 cartridges composite mortar for adhesion/modeling supporting taper as well as stainless steel wire for reinforcement, 2 tubular handles for mixers. Thermal bridge reduction by adhesive mounting, expansion free anchorage. Shown WM 12299 is 10 cm for insulation. The head is also available separately. >>> Price

 

Use

For wire-cable 3 and 4 mm at particularly thick insulation on almost all substrates. For medium and heavy kits in accordance with the specifications of the respective cable system. Simple or crosswise cable guidance. The distance of support to support if possible shouldn't exceed 1.8 m at horizontal ropes and 2.2 m at vertical ropes. Wall distance adjustable, recommended 5 cm, also 7 cm. With insulating strengths more than 16 cms ,according to execution of the assembly- choose, if necessary, reduced load admission, perhaps, preventing closer arrangement of the holders and only with wire rope of 3 mms (instead of 4 mms). The suitability of the XXL holder is to be estimated, in any case independently. For info about the product liability see GTC. Please, use if necessary also the info for the choice of suitable cross holders.

 

Available Sizes

Strength of the insulation

for wire-cable diameters

Distance - Wall to Cable

Item number

10 cm

3-4 mm

5 cm

WM 12279

10 cm

3-4 mm

7 cm

WM 12299

12 cm

3-4 mm

5 cm

WM 12299

12 cm

3-4 mm

7 cm

WM 12319

14 cm

3-4 mm

5 cm

WM 12319

14 cm

3-4 mm

7 cm

WM 12339

16 cm

3-4 mm

5 cm

WM 12339

16 cm

3-4 mm

7 cm

WM 12359

18 cm

3-4 mm

5 cm

WM 12359

18 cm

3-4 mm

7 cm

WM 12379

20 cm

3-4 mm

5 cm

WM 12379

20 cm

3-4 mm

7 cm

WM 12399

22 cm

3-4 mm

5 cm

WM 12399

22 cm

3-4 mm

7 cm

WM 12419

Note for customer in the online shop: X signals in the item number mean variable choices. The 3rd and 4th number stands for the complete skirt length of the fitting XXL support in cm. This length is dependent on the thickness of the insulation. A final coat of conventional strength and the adhesive layer are already taken into account. Please use the selection table for determining the variable X locations and enter the selected item number in Part 2 of the order process in the field 'comments' to. If there is no indication FassadenGrün will contact you about setting up the details.

 

Assembly

Relatively complex and expensive, always later with already applied insulation. Glue with composite mortar, modelling of a supporting cone with compound mortar. All details can be found under installation, in case of doubt visit the mounting portal with lots of important information on assembling our products in general.

 

Origin

"Made in Germany" (Saxony), hexagon nuts from the Far East.

Befestigungstechnik auf WDVS
Installed support, here with 5 cm of wall distance
Anker in Wärmedämmverbundsystem
functional principle
Seilsystem 4020 mit XXL-Ankern auf 20 cm Wärmedämmung
Cable system 4020 with XXL supports on 20 cm of insulation for Akebie