Variable basic form for high greening, the classification as 'cable system 8060' serves to give an exemplary building instruction for such arrangements. For large, windowless wall surfaces, particularly in addition for the lineful guidance of strictly formed climbing plants such as vines or Wisteria around windows, where several wall openings are framed by cable. The result is latticed Rank systems with very large meshes. Height and width of each 'mesh' are then usually greater than the maximum allowable distance between two wall brackets, which, depending on the construction style 1.2 - 2.2 m is. Therefore, cross holder satisfy not only in the nodes of the mesh, but there are intermediate supports needed.
Information and assembly tips (order as kit not possible)
|0.00 €||0.00 €||0.00 €||0.00 €||0.00 €|
Height x breadth: An area of max. 6 x 6 metres is shown (at a heavy kit 8.8 m x 7.20 mts). Base approx. 1 -2 m over the ground. Can be extended with extra mounts as the basic form, then all are approx. 1.5 m (2.2 or 1.8 m) to provide intermediate support, please enquire if necessary.
Required parts: You can build medium, heavy and massive kits together. This basic form isn't suitable for Easy and Light kits due to the large areas. Please also use the notes in your choice for fastening information needed and the kit, at the section: Climbing Plants. And depending on kit order this is needed:
Wire-cable 1.8 or 3 or 4 mm
Cross support (and dowel)
(Freely suspended) cross clamps
end hulls or sleeves
if necessary tool and bandage material
Installation: carried out as shown on the graphs, please also refer to the installation tips (see above).
Shoot guidance: See graphics R 01 - R 03. Branched garlands also as whole or half "fir tree" forms.