Wire Rope System 6060

Spread fan form with a particularly distinctive cable density, therefore very well suited for Clematis and annuals. As a formal element on larger, unstructured wall areas, both for groups-and individual positions. Also for larger heights and breadths. Please also use the indications tips at the section: Climbing Plants.

Order as a kit: Parts list, information and assembly tips

EasyLightMediumHeavyMassive
33-55 €59,80 €90-146 €149,80 €192,80 €
InfoInfoInfoInfoInfo
InstallationInstallationInstallationInstallationInstallation

The pre-assembled kits are suitable for all wall types, but not for insulation, cladding, and thin-walled concrete elements. Alternatives can be put together in all cases.

 

Height x breadth: max. approx. 2.5 m x 2 m at a heavy/massive kit to 3.0 x 2.3 m. The middle crossways cable has to be ordered above the middle considerably according to the "golden cut".

 

Installation: carried out as shown on the graphs, please also refer to the installation tips (s. above). For "golden cut" p. above.

 

Shoot guidance: See graphics. Small subject form with a short - medium-length cut (R 01). Also cord tree, single trunk with bifurcation into two Cordon arms. ('Palmette' - R 02). Then the stems should be guided on the edge cables inward in each case, attaching and/or putting the greenage on the internal ropes (R 03). Trunks in each case to lead approx. 50 cm under upper edge climbing field.

3 x modified easy style with an upper connection between the fan trellises
Fan trellis
Medium style, asymmetrical arrangement, Clematis Montana
Asymmetrical fan trellis
Medium trellis for a clematis
Trellis for clematis

Grapevine training on system 6060

R 01
R 02
R 03
Heavy style on 6 cm of insulation (WM 12XX2)
Steel cable in heavy style
Steel cable system as a medium construction style, Virginia creeper
Wire rope system for Virginia creeper
Easy kit
Light / Medium / Heavy / Massive kits