Optimal basic mold for forming frame-growth fields around doors with good cable density, with vines and roses. Economical guidance of the corner diagonally guided by cable/wire bridges. Turning of the form by 90 or 180 degrees is possible. Basic form 4050 is more suitable for very narrow wall areas. Please also use the indications for the choice of a suitable style at the section: Climbing Plants.
Order as a kit: Parts list, information and assembly tips
|54-96 €||119,80 €||160-275 €||279,80 €||369,80 €|
Height x breadth: max. approx. 3.2 m x 3.2 m (at a heavy/solid kit 4.4 m x 4.4 m). Distance between the three ropes: approx. 20 -35 cm, at Kletterrosern also 50 cm. Both rope bridges on the vertical ropes are placed on half a height of the middle rope. Toe approx. 0.5 - 1.2 meters above the ground. With more holders and cross clips the basic form is arbitrarily extendable, also to 4 or 5 parallel ropes, then interholders or in each case a short 'rope bridge' from two holders and one or several cross clips are to be intended of all approx. 1.5 ms (1.8 m)
Installation: carried out as shown on the graphs, please also refer to the installation tips (s. above).
Shoot guidance: see graphics. For 2 cord trees, the horizontal box is also then covered every summer by the green shoots (R-01).Also bending a trunk to the horizontal cordon is possible (R 02), in the horizontal part of the trunk then better medium length or long cut. At a larger distance of the ropes (40 cm) also two floors of construction of angle strains (R 03), upper horizontal extruded as Garland