• Deutsch
  • English
  • Français

Wire Rope Trellis System 3060

Assembly sketch for wire rope system no. 3060

Optimal basic form for the guidance of T-shaped climbing systems, with good cable density over windows, doors, etc.. The short cable sections ('wire bridges') arranged on the two t-shaped triple lines offer the plants additional grip. In cramped conditions, 2 lines instead of 3 should be used, (basic form 3040) to ensure sufficient distance to the facade's structurally relevant lines. For support in choosing a suitable construction style, please also refer to the guidelines in the climbing plants section (see charts at the bottom of each plant profile).

Want to order as a kit? click on green links here in chart for all the info!

Easy Light Medium Heavy Massive
£56-109 £133.71 £157-252 £251.83 £369.43
66-130€ 148.80€ 175-300€ 299.80€ 439.80€
Info Info Info Info Info
Mounting Mounting Mounting Mounting Mountings

 

Our pre-assembled kits are suitable for all wall types, with the exception of walls with outer insulation, cladding, and thin-walled concrete elements. Alternatives can be put together in all cases.

 

Height x Breadth: max. ~ 3.7 m x 6 m (4.7 m x 7.2 m for a Heavy / Massive Kit). Distance between the three ropes: ~ 20 -35 cm, see also "vine training" below. The rope bridge on the vertical ropes can be moved up from a centric position to be placed in the "golden ratio" of the vertical area (see diagram), thus emphasizing the striving character of the climbing plants. Base point:  ~0.5, 1.2 m above the ground. With more rope, mounts and cross clamps, the basic form can be expand as desired, also up to 4 or 5 parallel ropes. Then, ~ every 1.5 m (1.8 m) inter-supports (mounts) or in each case, a short "rope bridge" made from two holders and a cross clamp. Please contact us if you have questions! 

 

Installation: as indicated in the diagrams; see the mounting tips above (click on a kit for details). For Easy Kits, diagrams are not yet available. If you order climbing elements and ask specifically for this, you will receive installation instructions.

 

Vines Training: See diagrams. Vertical cordon in combination with horizontal cordon (R 01). Spur pruning, above also medium-length and long cut. Also a combination of two different vines in separate planting pits is possible(R 02); with off-centre guidance on the vertical ropes, the shoots/branches should point inwards. Central guidance and coming from a common planting pit is also possible (R 03); then halve the number of branches in the vertical area. The distance between the horizontal ropes should - depending on internode spacing typical of the variety - be rather long (so, about 30 -35 cm). 4 -5 horizontal ropes are often even more favourable than 3; then, the distance then can be less.

Heavy Kit with façade anchors WM 12XX8 on insulation for house vines in winter
Trellis on insulation (ETICS)
Massive Kit with WM 12153, climbing roses
Espalier/Trellis for roses
A grapevine in summer
Grapevine espalier - house espalier
Medium Kit, grapevine
Medium Kit, vine

Grapevine training on system 3060

R 01
R 02
R 03
Trellis in the easy construction style with eyelet screws WH 07080, blackberry
Espalier for blackberry

Light / Medium / Heavy / Massive Kit