This basic form-- with two-stem guidance and two horizontal wire ropes-- is suitable if more wire rope "density" in the horizontal area is desired but, due to a cramped area, three wires are inconvenient. The small rope sections ("bridges") on either side of the stem-guiding vertical wire rope offer the plants an additional "grip." Please also refer to the guidelines in the section on climbing plants for the choice of a suitable construction style.
Order as a kit: parts list, information and assembly tips
|32-63 €||87.80 €||96-210 €||199.80 €||279.80 €|
Height x Breadth: max. 3.5 m x 6 m (4.5 m x 7.2 m with Heavy/Massive Kits). Distance between the horizontal ropes: approx. 15 -50 cm; base approx. 0.5, 1.2 m above the ground. With more cable and mounts, the cable system is expandable in all directions... then approx. every 1.5 m (1.8 m) inter-supports (mounts) with short wire bridges are intended. If necessary please, ask.
Installation: is carried out as indicated in the diagrams. Please also use the installation tips above (click on a kit for more details).
Vine Training/Shoot Guidance: See diagrams. Vertical cordon combined with horizontal cordon (R 01). At the bottom: cut short, with attachment and insertion of the green shoots on the second vertical rope. Then the new shoots should only be on one side, thus facing the other rope. On top, cut medium-long or long. Also a lower branch junction and upper crossing of the cordon arms is possible (R 02), but then minimum distance of the vertical cables approx. 50-70 cm and, if necessary, halving the number of branches at both stems/trunks. Also 2 parallel garlands from one or two vines is possible, but then minimum distance of the wire ropes also approx. 50-70 cm (R 03).