This basic form is suitable when more wire rope density in the horizontal range is desired but if, due to a cramped area, three horizontal wires are not possible. The small rope sections ('bridges') on either side of the trunk-guiding vertical cable offer the plants an additional grip. Please also refer to the guidelines in our climbing plants section for support in choosing a suitable construction style (charts at the bottom of each plant profile).
Order as a kit: list of parts, information, and assembly tips
|28-50 €||69.80 €||94-170 €||159.80 €||233.80 €|
Height x Breadth: max. 3.5 m x 6 m (4.5 m x 7.2 m for Heavy/Massive Kits). Distance between the horizontal cables: approx. 15 - 50 cm; base approx. 0.5 to 1.2 m above the ground. With more cable and mounts, the cable system is expandable in all directions; then approx. every 1.5 m (1.8 m) inter-holders (mounts) are necessary.
Installation: as indicated in the diagrams. Please also use the assembly tips above (click on a kit for more details). For Easy Kits, diagrams are not yet available. If you order climbing elements and ask specifically for information, you’ll receive these installation instructions immediately.
Vine Training/Shoot Guidance: See diagrams. Horizontal cordon (R 01). If foliage is desired in the vertical range, plant two plants in a planting pit for the separation of vertical and horizontal growing area, (particularly with large heights and/or breadths in which the branched shoot then is led in the vertical area with unleafy stem (R 02). Use two separate planting pits if vertical shoot is replanted later on (no picture). Also 2 parallel garlands from a shoot are possible; then the minimum distance of the ropes should be approx. 70 cm (R 03).