• Deutsch
  • English
  • Français

Wire Rope System 2010

Simplest angled basic form, inexpensive due to the few mounts (wall spacers) needed. Using more mounts, it can be expended as desired/required. Suitable for the strictly linear guidance of small (annual) growing plants or also strongly formed or packed plants... also good for narrow or cramped areas. Please refer to the guidelines in the climbing plants section for further support (see charts at the bottom of each plant profile).

Order as a kit: parts list, information, and assembly tips

 7-13 € 19.80 € 24-45 € 49.80 € 62.80 €


The pre-assembled kits are suitable for all wall types, with the exception of insulation, cladding, and thin-walled concrete elements. Alternatives can be put together in all cases.


Height x Width: max. 1.5 m x 1.5 metres (with Heavy / Massive Kits- 2.5 m x 2.0 m). For extension, mounts are needed approx. every 1.5 - 1.8 m. Base point approx. 0.3- 1.2 m above the ground. With more cable and mounts, the basic form is expandable as desired/required. Please ask us.


Installation: is carried out as shown in the diagrams; take into account the assembly tips above (click on a kit for more details).


Vine Training/Shoot Guidance: See diagrams. Can be a garland with a short cut (R 01). If two varieties are desired, then put two plants in one planting pit and separate the vertical and horizontal areas, the second one in the vertical area with unleafy stem/trunk (R 02). If the vertical vine will be replanted later, two separate planting pits are used (R 03).

Heavy Kit, cross mount WM 12XX2, different climbing plants
Wire rope trellis on a roof terrace
Heavy construction style with cross mount WM 12XX2 on insulation, set-up of a formed vine in accordance with R 01
Wall mount on external insulation
wisteria in autumn
Wisteria with wire rope on a façade

Grapevine training on system 2010

R 01
R 02
R 03
Easy Kit
ight / Medium / Heavy / Massive Kit