Description / Price
Cross mount, made of stainless steel, shaft M 10, crosshead d =18 mm with grub screw, nut, spring washer, lock nut, special washer d 9.8 mm, seal and brass dowel DM 10030. The head is also available separately. >>> Price
For especially thin-walled pre-fab garages, further special cases (picture below). For wire-cable 3 mm for medium kits "Classic" in accordance with the specifications of the respective cable system (if purchased as pre-assembled set) often in connection with WM 10080. Simple or crosswise rope guidance, wall distance approx. 4 -5 cm. The distance of support to support, if possible, shouldn't exceed 1.5 m. Please also use the information about the choice of correct cross supports.
If necessary please notice the leaflet about drilling work. The underground should be flat to some extent or be made so for an optimal insulation. In concrete drilling depth 3,5 cm, the brass anchor is used then flush to the wall, please use the product sheet. If the mount is inserted with rawl plug, it is screwed in carefully by means of a screwdriver of valueable chrome vanadium steel (see corrosion), inserted straight through the grooves and turned. Then the nut and washer, etc. with moderate hand pressure is braced against the wall. Please also use the information as described for medium-sized kits.
For fastening into metal square Pipes/ tubes threads are cut into the posts and the mounts are screwed in directly. Installation is best done by one of your regional metal building firms. Inquire for trapezoidal sheet metals as modified version with tilting peg. Likewise inquire for linings with tilting peg, if necessary with extended shank. For special cases the distance mounts are without surcharge and available even with a longer shank (150 mm) than WM 10151. Also, additional nut / lock washer for counter-attachment on the back for through fixings wood posts, etc. is available.
Production "made in Germany" (Saxony’s own), hexagon nuts from the Far East.