Heavy Kits

To make the orientation easier, wire rope technology of high-grade stainless steel  is classified into 54 "wire rope systems" and portrayed by FassadenGrün respectively into five types. The "Heavy style" is the fourth variant and is characterized mainly by the expansion pressure-free mounting and is ideal for highly porous brick, but also generally for walls and sensitive border edge areas. You can buy cable systems already assembled as 'Heavy kits', but you may also supplement, or assemble all the items in the online shop for your unique trellis kit.

>>> Pricelist.


  • Affordable due to  threaded shank

  • Wire guided with "wire holders"

  • for middle to higher loads

  • for wall distances of 7-8 cm (also 13 cm)

  • for 4 mm of wire-cable

  • Stainless steel AISI 304, wire rope AISI 316

  • easy to install and assemble, most of drilling diameters 16 mm

All heavy wall mounts are firmly connected to the wire rope and fix it to the wall. The wire rope is "decoupled" in several sections, loads are evenly divided between end and inter-supports. Shock loads are absorbed dynamically via the elastic deflection of the supports. If there is still overload the wire can slip in the clamp head of the cross mount and it can be readjusted or re-tightened.

Area of application

Wire rope technique in a "heavy execution" is versatile, especially in the professional area. By larger heights there exists stronger stress, strain, and burden. “Heavy” is also needed at extended wall distances, in the open public area, as well as with such climbing plants where the “heavy” execution is recommended. Please, use the general tips, when required, for the planning.

Wall Mount / Surface

Wire rope technique in a heavy execution contains ,per default, supports WM 12191 made of Inox or stainless steel metal (high-grade steel) with a strong M12 threaded shank, seal, and crosshead, and with this, sieve hulls and composite mortar (non detachable connection, 7 cm of wall distance). This cable technique is particularly suitable for sensitive walls such as porous lightweight verticle perforated bricks ('Poroton', 'Eder', etc.) and generally where a bonding of the holder is desired. If you put together the kits yourself, other holders are possible, the choice depends then on the wall type:

  • WM 12161 for massive wood (then without composite mortar etc.)

  • WM 12227 for increased wall distances up to 13 cm

  • WM 12XX2 / WM 12XX4 (coming soon in english) for many Exterior Insulation Systems at low to middle loads

  • WM 12XX8 for many Exterior Insulation Systems at higher loads and wall distance


In the field of Wire rope systems / installation you will find instructions for installing heavy kits. Please also clarify whether you need tools!

Wire rope tech. for a Wisteria spindel
Cable/Wire technology 1040 for a wisteria spindle
Trellis 9030 on sensitive wall of porous, perforated bricks.
Wire rope tech. for Climbing plants
Linked wire rope tech. 9020 for Clematis Montana
Wire rope tech. and anchor
Standard anchor WM 12191 with composite mortar and sieve hull
Climbing support cables for Wisteria
Growing cable with WM 12191 for wisteria
Wall spacer made of stainless steel
Garage with growing system 7040, adhesion in sensitive margin areas.
Stainless steel wire rope for trellis - construction kits
Trellis 6050, stainless steel cable for vine, heavy kit with composite mortar because of the assembly in the sensitive upper margin area of the wall.