Medium Kit: “Classic”

• an established and reliable product for many years

• medium price range; some special mounts are more expensive

• for 3 mm wire rope and medium loads

• wall distance 6 cm. WH 10181 can provide 8 cm

• very sturdy even when exhausting the maximum distance between cross mounts (1.5 m)

• stainless steel AISI 304, wire rope AISI 316

• metric threaded rod M10; on the other side wood thread W9

• borehole 12 mm, drill depth 10 cm

• standard cross mount WH 10151 with the reliable rawl plug

• special mounts for difficult surfaces but none for insulation

• combinable construction styles/kits (can use a combo of cross mount and eye screws). Systems like 4050, 5010, 7030, 7060  etc. are easier to assemble.

• 3 wire ropes can be fixed in one head, making it very suitable for systems like 5060

Medium Kits are suitable for private use as well as semi-public areas, for grapevines, roses, and many climbing plants. If assembling in public areas or in higher areas with larger loads, we suggest a heavy or massive style/kit. For further general information in choosing your construction style, please visit the section on 'planning' a system.

Wire rope climbing aid systems in the “Classic” medium style are ideal for most masonry and wooden constructions. The standard Inox or stainless-steel cross mounts are superb for difficult wall types (hollow brick, autoclaved aerated concrete, mixed masonry), due to their deep anchorage. Should you wish to assemble your own individual kit or have us put one together with you, there are other cross mounts and eye bolts that you can choose from, the selection depending on your wall type:

• WM 10081 for thin concrete prefab garages, etc..

• WM 10083 for cladding, planking, boarding, etc..

• WM 10101 for special cases where you need to fasten pressure-free with composite mortar, or with a washer and nutfrom the opposite side (similar to through-hole fastening).

• WM 10121 (same as WM 10101, but with longer shaft) for adhesive installation. Also combinable with a counter set.

• WM 10151 as a longer version of WM 10121

• WH 10181 longer version of the standard cross-mount WH 10151 for more wall distance

Instructions on how to assemble Medium Kits are to be followed with the diagrams on the page of each respective cable system. Also, make sure that you have all the necessary tools for assembly.